LUBELAS Series (lubrication films for rubber parts)
What is LUBELAS Series (lubrication films for rubber parts)？
Appearance of
LUBELAS Series
LUBELAS Series (lubrication films for rubber parts) exhibit excellent durability even under dry conditions and gives high sliding performance to rubber parts. Additionally, LUBELAS can be used for the following purposes: protection of sliding rubber parts from abrasion; prevention of adherence and sticking of rubber parts, such as oil seals; surface modification of a base material at the time of material changed (for example, from fluororubber to EPDM), and putting a matte black touch. LUBELAS can be also applied to O-rings and flat parts.
LUBELAS Series (lubrication films for rubber parts)'s main characteristics
Main features
| Material： |
NBR/HNBR/EPDM/CR/NR/UR/FKM/IIR/CSM/SBR/BR etc ※For some kinds of materials, an undercoat is applied as a pretreatment to improve the adhesion of LUBELAS. |
|---|---|
| Purpose： |
To improve lubricating ability and durability/Anti-static/To improve oil and gasoline resistance / To imrove heat-resisting property / black lusterless etc |
| Application： |
O-ring、Oil seal、Stblizer bush、rubber sheet etc |
LUBELAS Series (lubrication films for rubber parts)'s technical data
| Product name | LM-3 | FS-1360 | FD-2500 | FI-2310 | FI-9240 | FN-2802 | FN-8560 |
|---|---|---|---|---|---|---|---|
| Color tone | Grey | Milky-white | Milky-white | Green | Black | Milky-white | Milky-white |
| Lubrication | MoS2 | PTFE | PTFE | PTFE | PTFE | PTFE | PTFE |
| Coating method | Spray | Spray | Spray | Spray | Spray | Spray | Spray |
| Cure temperature | ordinary temperature |
100℃ | 150℃ | 100～150℃ | 150℃ | 230℃ | 150℃ |
| Time | 60min | 60min | 40min | 60min | 60min | 40min | 40min |
| Film thickness | 5～15μm | 5～15μm | 5～15μm | 10～20μm | 5～20μm | 5～20μm | 5～15μm |
| Corrosion resistance | ○ | ○ | ◎ | ◎ | ○ | ◎ | ◎ |
| Non-adhesion | ○ | ○ | ○ | ◎ | ◎ | ◎ | ◎ |
| Oil resistance | △ | △ | ○ | ◎ | ◎ | ○ | ○ |
← swipe →
＊The data shown above are for your reference only. The numerical values described on this page are not guaranteed.